exustar pb 525, saint o altro?

  • La Pinarello Dogma XC è finalmente disponibile al pubblico! Dopo averla vista sul gradino più alto del podio dei campionati del mondo di XC 2023 con Tom Pidcock (con la full) e Pauline Ferrand-Prevot (con la front), Stefano Udeschini ha avuto modo di provarla sui sentieri del Garda
    Iscriviti al canale se non l'hai ancora fatto (clicca qui).


Ivan9.0

Biker serius
31/8/13
100
0
0
Visita sito
Buongiorno, ho provato dei pedali spd in passato e sicuramente sono l'ideale per certi percorsi ma non mi sento a mio agio, soprattutto nei percorsi molto stretti e tecnici. Sto valutando l'acquisto dei pedali flat per avere più grip nei tratti molto sconnessi.
Il budget è 40 euro circa ed ho letto sul forum pareri positivi sugli exustar pb525, altri consigliano i saint o altro.
Sarei orientato agli exustar ma ho letto che secondo alcuni sono poco scorrevoli. Per il mio utilizzo preferisco avere dei pedali molto scorrevoli
 

frenco

Edonista della MTB
21/11/16
2.498
845
0
padova
Visita sito
Bike
Fuel ex8
li ho, effettivamente rispetto ai campagnolo record or che usavo prima sono frizionati, a me non frega nulla, ma se a te importa non prenderli (credo che girino su bronzine, non su cuscinetti)
 
  • Mi piace
Reactions: Ivan9.0

markxxx79

Biker meravigliosus
7/8/12
17.253
6.210
0
44
ovunque ci sia un trail
Visita sito
Bike
un frontino e un fullino
...2 saint pesano come tre exustar !!!

Per la scorrevolezza , è per via del poco grasso o di bassa qualità , io da nuovi li ho smontati subito , puliti , re-ingrassati con un grasso per cuscinetti ,.
un uscita e giravano come violini , un colpo con la mano ti facevano 4 o 5 giri minimo
 
  • Mi piace
Reactions: Ivan9.0

Ivan9.0

Biker serius
31/8/13
100
0
0
Visita sito
...2 saint pesano come tre exustar !!!

Per la scorrevolezza , è per via del poco grasso o di bassa qualità , io da nuovi li ho smontati subito , puliti , re-ingrassati con un grasso per cuscinetti ,.
un uscita e giravano come violini , un colpo con la mano ti facevano 4 o 5 giri minimo
Non ho mai smontato dei pedali perciò non saprei. Se è un operazione semplice da fare prendo questi allora.
 

frenco

Edonista della MTB
21/11/16
2.498
845
0
padova
Visita sito
Bike
Fuel ex8
...2 saint pesano come tre exustar !!!

Per la scorrevolezza , è per via del poco grasso o di bassa qualità , io da nuovi li ho smontati subito , puliti , re-ingrassati con un grasso per cuscinetti ,.
un uscita e giravano come violini , un colpo con la mano ti facevano 4 o 5 giri minimo

interessante... ma hanno cuscinetti o bronzine?
 

markxxx79

Biker meravigliosus
7/8/12
17.253
6.210
0
44
ovunque ci sia un trail
Visita sito
Bike
un frontino e un fullino
interessante... ma hanno cuscinetti o bronzine?


riportò descrizione del sito :


Exustar E-PB525 Pedali FreeRide / BMX

- Coppia di pedali
- Corpo: 6061 aluminum, CNC-machined body, anodized
- Asse: ACCIAIO CNC machined
- Cuscinetti: LSL Bushing & Sealed
- Pins sostituibili
- Dimensioni : 103x100 mm
- Peso (produttore): 365 gr. la coppia
 

sten1959

Biker imperialis
24/8/09
10.197
289
0
Dolomiti
Visita sito
Bike
due ruote con un telaio sopra...
Non ho mai smontato dei pedali perciò non saprei. Se è un operazione semplice da fare prendo questi allora.


Se cerchi dei flat estremamente "grippanti" alla suola ti consiglio questi:
http://www.chainreactioncycles.com/...proof-neutron-evo-electron-evo-/rp-prod122950

Sono decisamente meglio degli Exustar ( li ho entrambi)
Se cmq decidi per gli Exu il loro punto debole sono i pin: si staccano/perdono molto facilmente per cui controllali spesso

Esistono comunque i ricambi:
https://www.bike-discount.de/it/comprare/exustar-pins-e-pb525-silver-87197/wg_id-434
 

Ivan9.0

Biker serius
31/8/13
100
0
0
Visita sito
Grazie per i consigli. Mi sembrano tutti allo stesso livello. Esteticamente gli exustar son quelli che mi piacciono meno, ma è probabile che prenda questi perché li trovo su Amazon ed ho un buono da sfruttare. Entro stasera decido
 

sten1959

Biker imperialis
24/8/09
10.197
289
0
Dolomiti
Visita sito
Bike
due ruote con un telaio sopra...
ma son di plastica e ho letto feedback molto negativi, forse meglio essere leggeri?


Si sono di materiale plastico ma non confonderli con quelli da 2 euro dei cinesi.
Non ho idea di che tipo di fb negativi tu possa aver letto ( personalmente io non ho mai letto nulla del genere ) ma ti assicuro che sono grippanti, leggeri, resistenti.
Avendoli entrambi ho avuto modo di paragonarli e tra i due meglio quelli di "plastica"
 
  • Mi piace
Reactions: Ivan9.0

Ivan9.0

Biker serius
31/8/13
100
0
0
Visita sito
Si sono di materiale plastico ma non confonderli con quelli da 2 euro dei cinesi.
Non ho idea di che tipo di fb negativi tu possa aver letto ( personalmente io non ho mai letto nulla del genere ) ma ti assicuro che sono grippanti, leggeri, resistenti.
Avendoli entrambi ho avuto modo di paragonarli e tra i due meglio quelli di "plastica"
Mi sa Che prendo questi nukeproof, mi piacciono di più.
Il dubbio è neri o verdi per la mia bici?
3304ed4dd675a033627767f363d51074.jpg
 

frenco

Edonista della MTB
21/11/16
2.498
845
0
padova
Visita sito
Bike
Fuel ex8
Non ho idea di che tipo di fb negativi tu possa aver letto

ho letto, come faccio sempre, i giudizi negativi proprio sul link che hai dato di chain reaction:

The pedals lasted approx 6 weeks before literally falling apart. The nut the holds the body on came undone whist out riding and the body came away from the axle, when I put it back together the seal on the inside would sit correctly due to being damaged when the body came off, they lasted about 3 more rides after that before crapping out completely...

Had these pedals on my carbon exo cranks and the padels have worked them selfs lose and has resulted in my carbon crank arm to snap not happy at all would not recommend these pedals as they are very unreliable and have to tighten them up before everyride

Bought these not so long ago. I have used them a total of 3 times. The first 2 times I actually liked them as they feel really good and secure underfoot. That is until today. I felt what seems to be the left pedal loose on the shaft. Not happy with these.

love the look and feel, you really stick to them..........but on the second trail I attempted, a relatively small crash coming out of a berm sheered them. The axles are solid and obviously robust so they are fine, the plastic however is a let down, it is not tough at all and cannot stand up to any real abuse. The pedals are still ride-able but I am sure another crash will do for them. When that happens I will switch to some metal pedals like the nukeproof Horizons. in essence: only buy if you are very strapped for cash and not planning on pushing yourself, otherwise some slightly more expensive and durable pedals might be a better option........spend money to save money

Really light, very grippy, and look really cool, but after 2 weeks one started to rattle loose. Also, being made of plastic means that if you bash a pin hard then the plastic around it simply bends and you have a bent pin (maybe that's my fault for buying plastic pedals!)
And one of the bolts became loose too.
To be fair, I attached them to a 24" unicycle which I use for urban mucking around, lots of jumping, moderate drops, and consequently lots of bashing against hard surfaces. Maybe these are intended for different/lighter use? I had Hognesium pedals before and think I'll go back to those.

Sure these pedals look nice, but I didn't buy them to be decorations. After only 8 total miles with these pedals on the bike the pedal slipped off its axle. Yes, I installed them properly.

After only two rides I've noticed that half of the pins on one of the pedals had fallen off. Shortly after one of the pedals developed a clicking sound on every pedal stroke. I've checked and tightened the pedal and the click is still there.
 

sten1959

Biker imperialis
24/8/09
10.197
289
0
Dolomiti
Visita sito
Bike
due ruote con un telaio sopra...
ho letto, come faccio sempre, i giudizi negativi proprio sul link che hai dato di chain reaction:

The pedals lasted approx 6 weeks before literally falling apart. The nut the holds the body on came undone whist out riding and the body came away from the axle, when I put it back together the seal on the inside would sit correctly due to being damaged when the body came off, they lasted about 3 more rides after that before crapping out completely...

Had these pedals on my carbon exo cranks and the padels have worked them selfs lose and has resulted in my carbon crank arm to snap not happy at all would not recommend these pedals as they are very unreliable and have to tighten them up before everyride

Bought these not so long ago. I have used them a total of 3 times. The first 2 times I actually liked them as they feel really good and secure underfoot. That is until today. I felt what seems to be the left pedal loose on the shaft. Not happy with these.

love the look and feel, you really stick to them..........but on the second trail I attempted, a relatively small crash coming out of a berm sheered them. The axles are solid and obviously robust so they are fine, the plastic however is a let down, it is not tough at all and cannot stand up to any real abuse. The pedals are still ride-able but I am sure another crash will do for them. When that happens I will switch to some metal pedals like the nukeproof Horizons. in essence: only buy if you are very strapped for cash and not planning on pushing yourself, otherwise some slightly more expensive and durable pedals might be a better option........spend money to save money

Really light, very grippy, and look really cool, but after 2 weeks one started to rattle loose. Also, being made of plastic means that if you bash a pin hard then the plastic around it simply bends and you have a bent pin (maybe that's my fault for buying plastic pedals!)
And one of the bolts became loose too.
To be fair, I attached them to a 24" unicycle which I use for urban mucking around, lots of jumping, moderate drops, and consequently lots of bashing against hard surfaces. Maybe these are intended for different/lighter use? I had Hognesium pedals before and think I'll go back to those.

Sure these pedals look nice, but I didn't buy them to be decorations. After only 8 total miles with these pedals on the bike the pedal slipped off its axle. Yes, I installed them properly.

After only two rides I've noticed that half of the pins on one of the pedals had fallen off. Shortly after one of the pedals developed a clicking sound on every pedal stroke. I've checked and tightened the pedal and the click is still there.


Io li ho presi ma non ho lasciato alcun fb positivo.
Se non mi fossi trovato bene al 90% l'avrei lasciato.
Per la legge dei grandi numeri qualcuno di insoddisfatto lo si trova sempre.
Comunque 284 fb con punteggio complessivo di 4.6 su 5 a me sembra ottimo
 

Navarre

Biker tremendus
13/5/15
1.107
206
0
53
Roma
plus.google.com
Bike
Scott Scale 960 custom, Scale 945 custom, Cube Reaction HPA Pro 29 Custom
Ho gli Exustar e non sono malaccio, ma sarà il fatto che sono pesantino, dopo un po' mi perdo i pin o peggio i pin si allentano e cigolano a ogni pedalata, nonostante il frenafiletti consigliato da Dart Vader...inoltre i pin sono difficili da stringere morte, si spanano che è un piacere.

Mi sto trovando molto bene invece con questi, trovati in offerta a 67 € (certo è un'altra fascia di prezzo):
https://www.bike-discount.de/de/kaufen/reverse-components-escape-pedal-schwarz-95683
202808_1600830.jpg
 

frenco

Edonista della MTB
21/11/16
2.498
845
0
padova
Visita sito
Bike
Fuel ex8
Io finora sugli exustar ci ho fatto solo 500km e i pin li ho loctitizzati prima di iniziare ad usarli, per ora OK.
Certo che il punteggio dei plasticoni è buono, non si discute, ma il motivo per cui guardo i negativi è per capire le debolezze del prodotto, e poi i giudizi sono quasi sempre lasciati dopo l'acquisto, non anni dopo come dovrebbe essere. Vale per tutti ovviamente.
Mentre un estruso di alluminio come gli exustar è di solito stabile nel tempo e costante in qualità, le stampate di plastica posso avere variabilità elevate e soffrire di altri problemi, probabilmente sono comunque perfetti per gente leggera ma mi mettono a disagio coi miei quasi 100kg.
Inoltre i plasticoni hanno i pin di alluminio che si consumano molto prima di quelli di acciaio. Ma sono preferenze personali.
 

markxxx79

Biker meravigliosus
7/8/12
17.253
6.210
0
44
ovunque ci sia un trail
Visita sito
Bike
un frontino e un fullino
...cmq io dopo anni di flat , ho capito che come tutte le parti della bike , se più spendi all'inizio , meno spendi dopo . ho iniziato anche io con quei classici exustar , poi sono passato a questi :
https://www.srperformance.it/it/hom...-flat-exustar-e-pb531-nero.1.1.145.gp.2703.uw
migliori come pins e presa della scarpa dei precedenti , oltre che girano ancora come violini , adesso ho questi su una bike :

http://www.milkywayshop.it/pedali-gripper-vp-007-co19-0014

e questi sull'altra :
http://www.ruotapiu.it/index.php/product/funn-python/#.WNrBaW_yjIU

inutile dire che gli ultimi due , li stò usando da 2 anni e sono perfetti nonostante botte , cadute ed altro , e girano ancora come violini
 

Classifica mensile dislivello positivo